8" Poly bucket edge for mid size skidsteers and small loaders (Most popular size)
This is our mid size poly bucket edge for skid loaders and mini front end loaders. These edges come standard with two bevels and are sold as blanks with no holes drilled. Unlike our competition, Cutting Edge Poly has designed a real poly bucket edge that doesn't require metal plates throughout the edge! Just line our edge up to your current bucket, drill the holes and countersink. Attach these edges with standard or heavy duty carriage bolts and washers. That's all there is to it! This makes these edges universal for nearly any bucket. The edges are perfect for snow removal, grain, trash, soil, or anywhere that metal edges cause damage.
Recommended installation instructions:
1st: Clamp the edge to the bottom of your bucket with the center of the edge directly under your bolt holes. Note: If your current bolt holes are more than 3 inches from the end of your bucket you will need to go to the 10" edge to use reversible bevels.
2nd: Drill your holes to match your current holes in the bucket
3rd: Remove the edge and countersink 3/4 of an inch from the bottom side to match or exceed the washers used.
4th: Install the carriage bolt with the threads up, using a lock washer and standard nut.
5th: Enjoy your new edge.
Note: We are now offering grade 8 carriage bolts in 3 inch lengths below. These are sold as units of 1 with washers and nut. Add as many as you need to attach your edge.