- Store
- >
- Bucket Edges
- >
- 6" and 10" Deep Bucket Poly Cutting Edge
6" and 10" Deep Bucket Poly Cutting Edge
Our bucket and sweeper edges are Cutting Edge Poly’s biggest seller. Used by professionals all over the world. Our edges will save your accounts and help to avoid costly repairs. These edges glide quietly over any material. These are perfect for snow, waste, fertilizer, agriculture or anywhere that steel causes issues.
All 6" edges will come standard with one bevel and all 10" bucket edges will come standard with two bevels. All edges are 1.5" thick.
Bucket Poly Cutting Edges come undrilled, you can select our hole drilling service for an additional $75.00 below, please give us your exact specifications.
Please note: In order to increase the life of the edge, our latest design of Cutting Edge Poly's edges do not come with an inset or 15 degree bevel as seen in the picture. All edges now mount flat to the bucket and have a standard 45 degree bevel for a true universal fit. Please let us know if you would like a double bevel. Each bevel decreases the top mounting area by approximately 1 inch.
Recommended installation instructions:
1st: Clamp the edge to the bottom of your bucket with the center of the edge directly under your bolt holes. Note: If your current bolt holes are more than 3 inches from the end of your bucket you will need to go to the 10" edge to use reversible bevels.
2nd: Drill your holes to match your current holes in the bucket
3rd: Remove the edge and countersink 3/4 of an inch from the bottom side to match or exceed the washers used.
4th: Install the edge with the threads up, using a lock washer and standard nut.
5th: Enjoy your new edge.
Note: We are now offering grade 8 carriage bolts in 3 inch lengths below. These are sold as units of 1 with washers and nut. Add as many as you need to attach your edge.